Toucam 740K in project box

I put my Toucam into a small project box I picked up at Radio Shack.  I epoxied a T-ring to the project box, and have temporarily added a film canister using double sided foam tape.

Celestron Tele-Extender for Eyepiece Projection

This has M42 threads on one end, and the other end fits over the visual back of a SCT telescope.

In this configuration, I use the toucam for piggyback capture.

Close-up of 1 1/2" to 2" rubber coupler.

Vesta Pro body snugly fits in 2" end and is secured by tightening the clamp ring.

T-Ring fits nicely in the 1 1/2 end

Focal ReducerClose-up of 1 1/2" to 2" rubber coupler.

Vesta Pro body snugly fits in 2" end and is secured by tightening the clamp ring

Home-made focal reducer inside

Notice T-ring and lens element